brightfish Posted June 15, 2009 Share Posted June 15, 2009 Does anyone know if it's possible to have variable type (basic sequential numbers) mirrored? I'm trying to put sequential numbers on a clear static cling that will be viewed through the material, so it needs to print "wrong-reading." Thanks in advance, BC Link to comment Share on other sites More sharing options...
esmith Posted June 15, 2009 Share Posted June 15, 2009 I suppose you could create an OnRecordStart rule that reads the numbers of the field into an array and then returns them in reverse order... Link to comment Share on other sites More sharing options...
brightfish Posted June 15, 2009 Author Share Posted June 15, 2009 Unfortunately, that won't work. Not only do they have to be in reverse order, but each number has to be mirrored, so that it would appear right reading if you viewed it in a mirror. Thank you for the help though, BC Link to comment Share on other sites More sharing options...
esmith Posted June 15, 2009 Share Posted June 15, 2009 Duh. I should have thought about that first! I just checked with my co-worker running the Indigo 5000 in our shop (since we also have done static clings in the past) and he confirmed that he can set the press to print a mirror image of the file. Do you have that capability in your shop? Link to comment Share on other sites More sharing options...
brightfish Posted June 15, 2009 Author Share Posted June 15, 2009 Yes, our press can do that as well. That's the path that I'm working on now, but I'm not sure if that is going to work out because of the orientation of clings on the frame and the need for them to be in sequential order on a finished roll. Fun stuff - half a day just trying to get a sequential number on a cling! Link to comment Share on other sites More sharing options...
rpaterick Posted June 15, 2009 Share Posted June 15, 2009 so it needs to print "wrong-reading." Thanks in advance, BC http://www.sobolsoft.com/excelreverse/ I tried it and it worked on the Trial version. For $30.00 it might be worth it! Good luck. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.