CCS_Printing Posted May 24, 2012 Share Posted May 24, 2012 Hello all, I need to use FP Imposer to create differently spaced vertical gutters. 8 up standard BC's (3.5x2) on 8.5 x 11 sheet. ".25 horizontal gutter, ".25 top and bottom vertical gutters, with a "1.25 middle vertical gutter. See image below. Please let me know if this is currently possible in FP Imposer, thanks! http://forums.printable.com/attachment.php?attachmentid=640&stc=1&d=1337886609 Link to comment Share on other sites More sharing options...
FreightTrain Posted May 24, 2012 Share Posted May 24, 2012 CCS This is not possible. Link to comment Share on other sites More sharing options...
CCS_Printing Posted May 25, 2012 Author Share Posted May 25, 2012 http://forums.printable.com/attachment.php?attachmentid=641&stc=1&d=1337959358 ...thanks for the reply Link to comment Share on other sites More sharing options...
FreightTrain Posted May 25, 2012 Share Posted May 25, 2012 For impositions that need any major customization, some time you need to use a higher end application. FP Imposer likes things to be symmetrical. Sorry for the inconvenience. Link to comment Share on other sites More sharing options...
ijanovick Posted June 4, 2012 Share Posted June 4, 2012 I have come across this issue in the past too. Unfortunately our only workaround was to use preps offline before sending the file to the press. Link to comment Share on other sites More sharing options...
MeeshKB Posted August 8, 2012 Share Posted August 8, 2012 For impositions that need any major customization, some time you need to use a higher end application. FP Imposer likes things to be symmetrical. Sorry for the inconvenience. Is there imposition software out there which can do these more complicated setups AND is compatible with FusionPro VDP? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.