rjay23 Posted May 16, 2019 Posted May 16, 2019 I have a US business sized card with a sequential number on each card. I need to impose it on an 11 x 17 sheet but I need 10 cards that will bust cut on each half of the sheet. It would be as if I had 10 cards imposed with no gaps on an 8.5 x 11 sheet and then two of those together for an 11 x 17 sheet. Can this be accomplished? I've attached a little screenshot of how I need it laid out. Quote
sschardan Posted May 17, 2019 Posted May 17, 2019 Yes. Setup the imposition like this: Horizontal step = 4, spacing = 1.5" Vertical step = 5, spacing = 0 Then, right click or control click on the 1st column and select "discard space and bleed right of column, then do the same for the 3rd column. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.