different imposition layout

[rjay23]

I have a US business sized card with a sequential number on each card. I need to impose it on an 11 x 17 sheet but I need 10 cards that will bust cut on each half of the sheet. It would be as if I had 10 cards imposed with no gaps on an 8.5 x 11 sheet and then two of those together for an 11 x 17 sheet. Can this be accomplished?

I've attached a little screenshot of how I need it laid out.

[sschardan]

Yes. Setup the imposition like this:

Horizontal step = 4, spacing = 1.5"
Vertical step = 5, spacing = 0

Then, right click or control click on the 1st column and select "discard space and bleed right of column, then do the same for the 3rd column.

[rjay23]

Excellent! Thank you so much!