|
#1
October 9th, 2017, 09:38 AM
|
|||
|
|||
Imposition Duplexing Defaults to Long Edge
I am having an issue with an Imposition I am building for a Rollem slitter. I have it set up on the sheet how I want it but the Duplexing choice keeps staying on Long edge when I choose Short Edge and hit okay. The next time I go into the options, it's back to Long Edge and both choices are checked. Is there any way to fix this? I'm getting the second page of the document rotating 180 degrees because of this. I did not have this problem last week when I started building the imposition layout. I'm attaching the Imposition file here to look at.
__________________
Bryan Mathes, Print Production Specialist FusionPro Designer 9.3.36, FusionPro Producer (Server) API 9.3.36 Mac OSX 10.8.5 Mac Pro 2.8 GHz Quad Core Intel Xeon 
|
|
#2
October 10th, 2017, 08:57 AM
|
|||
|
|||
|
Re: Imposition Duplexing Defaults to Long Edge
You have the Imposition set to rotate 180. set it back to 0 and it will work.
Aaron
__________________
Aaron Nissalke Digital Print Specialist FP 9.3.36 / Acrobat X / OSX 10.11.6
|
|
#3
October 10th, 2017, 09:08 AM
|
|||
|
|||
|
Re: Imposition Duplexing Defaults to Long Edge
Aaron,
I tried it with Rotation off and it doesn't work that way either. It still defaults to long edge even when I choose short edge. I must have forgot to turn off the rotation on the file I attached here. Sorry about that. I opened the file you attached and composed with it and page 2 is rotated 180 degrees. And it changed to long edge after I chose short edge.
__________________
Bryan Mathes, Print Production Specialist FusionPro Designer 9.3.36, FusionPro Producer (Server) API 9.3.36 Mac OSX 10.8.5 Mac Pro 2.8 GHz Quad Core Intel Xeon
|
|
#4
October 10th, 2017, 10:05 AM
|
|||
|
|||
|
Re: Imposition Duplexing Defaults to Long Edge
OK.. I think something was wrong with the way the impo file saved itself. I after multiple trys got it to save the flip on short edge.
Try this. Aaron
__________________
Aaron Nissalke Digital Print Specialist FP 9.3.36 / Acrobat X / OSX 10.11.6
|
|
#5
October 10th, 2017, 10:48 AM
|
|||
|
|||
|
Re: Imposition Duplexing Defaults to Long Edge
Thanks Aaron. That worked. I need to make one change and I'm hoping that doesn't break it.
I had tried making a new imposition several times and it always went back to the long edge. I've never seen this before with the Imposer software.
__________________
Bryan Mathes, Print Production Specialist FusionPro Designer 9.3.36, FusionPro Producer (Server) API 9.3.36 Mac OSX 10.8.5 Mac Pro 2.8 GHz Quad Core Intel Xeon
|
|
#6
October 10th, 2017, 11:13 AM
|
|||
|
|||
|
Re: Imposition Duplexing Defaults to Long Edge
I made one change to the imposition file and it switched to long edge and I can't get it back to short edge.
__________________
Bryan Mathes, Print Production Specialist FusionPro Designer 9.3.36, FusionPro Producer (Server) API 9.3.36 Mac OSX 10.8.5 Mac Pro 2.8 GHz Quad Core Intel Xeon
|
|
#7
October 10th, 2017, 12:34 PM
|
||||
|
||||
|
Re: Imposition Duplexing Defaults to Long Edge
This is a known issue with FP Imposer on Mac. It will be fixed in an upcoming patch build of FusionPro VDP 10 for Mac.
There are a couple of workarounds. One is to use the FP Imposer app on Windows. The other is to edit the FPI file in a text editor and change the line "FlipOnShortEdge=True" to "FlipOnShortEdge=False", or vice-versa.
__________________
Dan Korn FusionPro Developer / JavaScript Guru / Forum Moderator PTI Marketing Technologies | Printable | MarcomCentral  LinkedInI am a not a Support engineer, and this forum is not a substitute for Support. My participation on this forum is primarily as a fellow user (and a forum moderator). I am happy to provide help and answers to questions when I can; however, there is no guarantee that I, or anyone else on this forum, will be able to answer all questions or fix any problems. If I ask for files to clarify an issue, I might not be able to look at them personally. I am not able to answer private messages, emails, or phone calls unless they go through proper Support channels. Please direct any sales or pricing questions to your salesperson or inquiries@marcom.com. Complex template-building questions, as well as all installation and font questions or problems, should be directed to FusionProSupport@marcom.com. Paid consulting work may be required to fulfill your template-building needs. This is a publicly viewable forum. Please DO NOT post fonts, or other proprietary content, to this forum. Also, please DO NOT post any "live" data with real names, addresses, or any other personal, private, or confidential data. Please include the specific versions of FusionPro, Acrobat, and your operating system in any problem reports or help requests. I recommend putting this information in your forum signature. Please also check your composition log (.msg) file for relevant error or warning messages. Please post questions specific to the MarcomCentral Enterprise and Web-to-Print applications in the MarcomCentral forum. Click here to request access. Or contact your Business Relationship Manager (BRM/CPM) for assistance. Please direct any questions specific to EFI's Digital StoreFront (DSF) to EFI support. How To Ask Questions The Smart Way The correct spellings are JavaScript, FusionPro, and MarcomCentral (each with two capital letters and no spaces). Acceptable abbreviations are JS, FP, and MC (or MCC). There is no "S" at the end of "Expression" or "Printable"! The name of the product is FusionPro, not "Fusion". "Java" is not is not the same as JavaScript. Check out the JavaScript Guide and JavaScript Reference! FusionPro 8.0 and newer use JavaScript 1.7. Older versions use JavaScript 1.5. return "KbwbTdsjqu!spdlt\"".replace(/./g,function(w){return String.fromCharCode(w.charCodeAt()-1)}); 
|
|
#8
October 10th, 2017, 01:03 PM
|
|||
|
|||
|
Re: Imposition Duplexing Defaults to Long Edge
Thanks Dan. I think I may have found a work around. It seems like certain settings in the advanced options change the edge from short to long.
I'll try it again when we upgrade to version 10.
__________________
Bryan Mathes, Print Production Specialist FusionPro Designer 9.3.36, FusionPro Producer (Server) API 9.3.36 Mac OSX 10.8.5 Mac Pro 2.8 GHz Quad Core Intel Xeon
|
|
#9
October 12th, 2017, 01:27 PM
|
|||
|
|||
|
Re: Imposition Duplexing Defaults to Long Edge
Dan,
While I appreciate you fixing this in the current version could you please do something to address FPimposer for previous versions (like mine)? Maybe release the imposer as a separate download? This has been a known issue for a while. Thanks Aaron
__________________
Aaron Nissalke Digital Print Specialist FP 9.3.36 / Acrobat X / OSX 10.11.6
|
|
#10
November 10th, 2017, 08:51 AM
|
||||
|
||||
|
Re: Imposition Duplexing Defaults to Long Edge
Quote:
__________________
Dan Korn FusionPro Developer / JavaScript Guru / Forum Moderator PTI Marketing Technologies | Printable | MarcomCentral LinkedInI am a not a Support engineer, and this forum is not a substitute for Support. My participation on this forum is primarily as a fellow user (and a forum moderator). I am happy to provide help and answers to questions when I can; however, there is no guarantee that I, or anyone else on this forum, will be able to answer all questions or fix any problems. If I ask for files to clarify an issue, I might not be able to look at them personally. I am not able to answer private messages, emails, or phone calls unless they go through proper Support channels. Please direct any sales or pricing questions to your salesperson or inquiries@marcom.com. Complex template-building questions, as well as all installation and font questions or problems, should be directed to FusionProSupport@marcom.com. Paid consulting work may be required to fulfill your template-building needs. This is a publicly viewable forum. Please DO NOT post fonts, or other proprietary content, to this forum. Also, please DO NOT post any "live" data with real names, addresses, or any other personal, private, or confidential data. Please include the specific versions of FusionPro, Acrobat, and your operating system in any problem reports or help requests. I recommend putting this information in your forum signature. Please also check your composition log (.msg) file for relevant error or warning messages. Please post questions specific to the MarcomCentral Enterprise and Web-to-Print applications in the MarcomCentral forum. Click here to request access. Or contact your Business Relationship Manager (BRM/CPM) for assistance. Please direct any questions specific to EFI's Digital StoreFront (DSF) to EFI support. How To Ask Questions The Smart Way The correct spellings are JavaScript, FusionPro, and MarcomCentral (each with two capital letters and no spaces). Acceptable abbreviations are JS, FP, and MC (or MCC). There is no "S" at the end of "Expression" or "Printable"! The name of the product is FusionPro, not "Fusion". "Java" is not is not the same as JavaScript. Check out the JavaScript Guide and JavaScript Reference! FusionPro 8.0 and newer use JavaScript 1.7. Older versions use JavaScript 1.5. return "KbwbTdsjqu!spdlt\"".replace(/./g,function(w){return String.fromCharCode(w.charCodeAt()-1)});
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
